Coates Lab N W50 White. C-Mix 2000 base colour shade. C-Mix inks are used for colour matching PMS, RAL, HKS and other custom colours. As these inks have high transparency they are only meant for printing on to a white substrate. For Glass, Ceramics and metals. Gloss Finish. 2 component Ink. Air dry or oven cure. APPLICATION Pad printing inks for printing on glass, ceramics, duroplastics, metals as well as chromium and nickel-plated, gold-plated or rhodium coated surfaces. PROPERTIES • Pad inks LAB-N 341705 are solvent based pad printing inks. They are processed as 2-component ink with hardener. • Pad inks LAB-N 341705 do not contain butyl glycolate (GB ester), cyclohexanone and solvent naphtha. • Ink range LAB-N 341705 shows good printability, also for high-speed printing cycles. The inks dry chemical-physically and result in a glossy finish. • LAB-N 341705 inks are suitable for a variety of applications, especially for technical applications and cosmetic articles requiring high resistances. • Cured prints exhibit high mechanical resistances as well as good chemical resistances against many organic solvents, thinned alkalis and acids, oils and grease. • Due to the binders (epoxy resin) pad printing inks LAB-N 341705 are suitable for indoor and short-term outdoor applications. • We offer three different hardeners to optimally adjust LAB-N 341705 inks to various requirements. • Note: Because of the variety of substrates, pre-tests are essential. It is also advised to check efficiency of possibly required pre-treatment of substrates (cleaning/degreasing, flame/corona/plasma treatment) or maybe even post-treatment (flame-drying).