TP307-M50 Magenta C-Mix 2000 base colour shade. C-Mix inks are used for colour matching PMS, RAL, HKS and other custom colours. As these inks have high transparency they are only meant for printing on to a white substrate. Suitable for printing on pre-treated polyolefines, i.e. polypropylene (PP) and polyethylene (HD-PE, LD-PE) such as bottles, formed parts etc. The ink range is also appropriate for printing on chromium-plated surfaces, coated substrates and various thermoplastics such as PMMA (“acrylic glass”), ABS and duroplastics (phenolic and melamine resins, glass-fibre reinforced polyester and epoxy resins). TP 307 inks are especially used for a variety of technical-industrial applications. PROPERTIES • Pad inks TP 307 are solvent based pad printing inks. They are processed as 2-component ink with hardener. • In line with current safety requirements pad printing inks TP 307 have been formulated with especially environmentally compatible raw materials. TP 307 inks do not contain aromatics, butyl glycolate (GB-Ester), cyclohexanone, Bisphenol A (BPA) and also no polycyclic aromatic hydrocarbons (PAH). Exception: AB bronzes 75/AB to 79/AB (contain aromatics) and black colour shades N50 and 65 (PAH containing pigments). • Ink range TP 307 shows good printability. The inks dry chemical-physically and result in a glossy finish. • This ink range is especially suitable for technical/industrial applications requiring high physical and chemical resistances. • Fully cured prints show a good scratch resistance and a highly tough surface. • TP 307 inks exhibit good resistance against chemical cleaning agents. • TP 307 inks are suitable for long-term outdoor applications. • Note: Because of the variety of substrates, pre-tests are essential. It is also advised to check efficiency of possibly required pre-treatment of substrates (cleaning/degreasing, flame/corona/plasma treatment) or maybe even post-treatment (flame-drying).